 |
|
|
 |
|
|
|
|
 |
|
|
|
NDT Systems, Inc., once again is pleased to introduce a new and novel concept in Ultrasonic Flaw Detectors. The Raptor ushers in a new category of Ultrasonic Flaw Detectors by offering full imaging capability in a standard hand held flaw detector. Not only is the RAPTOR a high performance flaw detector offering features usually found on premium flaw detectors but it adds functionality including C-Scan, Dual Axis B-Scan, 3D, Pan & Zoom, Spreadsheet review mode and more.
Notable features of the RAPTOR Imaging Flaw Detector:
Fully sunlight readable 640x480 Pixel display. This display is the absolute leading edge technology in commercial flat panel displays. The viewing angle is 160 degrees in all axis making easy to view from any angle. The intensity is also adjustable from 10%-100%
Simple Direct Access Keys to major menu items.
F1-F8 Context Sensitive Direct Access Keys
Sync: IP or IF - 1st, 1st-2nd, 2nd-3rd
(- to -), (- to +), (+ to -) and (+ to +) Gating , either IP-1st, 1st to 2nd or IF
Spike and Square Wave Pulsers are fully user adjustable. Spike voltage up to 350V and Square wave voltage to 400v, from 10 to 10,000ns in 5ns increments.
 Rep Rate is automated or can be user adjustable from 1Hz (ONE Hertz) to 5KHz in
The RAPTOR also supports a growing list of available scanners from simple manual scanners to full production oriented scanners incorporating Stepper and Servo drives (via an optional external control unit). There are even lightweight battery powered scanners available providing controlled motion semi automated scanning capability. The picture to the left is demonstrating the RCA-10 battery powered Cantilever Arm Scanner. NO AC Power is required. The battery powered scanner is powered via an external battery pack incorporating the same battery as used in the RAPTOR instrument.
|
|
|
|
|
 |
|
|
|
SPECIFICATIONS:
|
|
Display: Full 480 x 640 (VGA) Graphic (3.4"W x 4.55"H)
New Technology Display and FULLY Sunlight Viewable
SplitView: (Handheld Industry First)
Size as a Function of Main Trace Window Size
SplitScan: (Handheld Industry First)
Display A-Trace and B or C Scan Simultaneously
AutoTrack: (Handheld Industry First)
When in SplitView, Second Window Displays
a Zoom View of the Main A-Trace which Tracks
The Echo Being Measured
A, B and C-Scan imaging native
Screen Freeze Mode or Instant-Freeze Mode... Perfect for Spot Weld Applications
Physical:
5.75" Wide X 3" Deep X 9.5" Long - 5.6 lbs with Battery
All Aluminum with Sealed and Rubberized end caps
Range: 0.05" - 400" Delay: 0 - 165" @ Full Range!
Resolution - 0.0001"/0.001 • Inch/mm selectable
Velocity Range:
0.0490 to .9999 in/us • fully adjustable.
Calibration: Range, Delay, Velocity & Zero
Pulser / Receiver: Up to 10KHz Rep Rate, Spike and Square Wave Pulser (50v to 400v and 5 to 10,000ns)
Display Mode: RF, +HW, -HW, FW - Hollow and Filled
GAIN: 100dB, Damping - 8 levels
Frequency Range - 500Khz - 20MHz
Tuning: 0.5, 1.0, 2.5, 5 and 10MHz
|
|
|
Probe Select: Single / Dual Element
Probe ID Key (NDT Gaging Probes) or Probe Library Selection
Peak Echo Hold: Fixed or Unique Timed "Waterfall" reset
Alarm: LED Thickness High, Lo or High/Lo, Amp +/- Level
I/O: USB 2.0 Connectivity
SD Card: Up to 32GB user removable Flash Card
Memory: 75MB On Board Memory (system & storage)
Operational Modes:
Single/Dual/Angle/Contact/Delay
Gates:
Contact - IP-1st, 1st-2nd Permits Through Paint
Delay/Bubbler/Immersion
IP Blocking, IF Blocking, IF-1st, 1st-2nd Echo Blk
Amplitude: 3 Gates, Track IP, IF, previous gate. Alarm POS or NEG Gating
20 Point DAC
Imaging Features:
A-Scan, B-Scan - Time encoded 'B' Scan (Scrolling)
Encoded B-Scan, SpreadSheet View, Pan & Zoom, 3D, Histogram
Scanners: Manual, Semi-Automated and Fully automated scanners supported.
Power Requirements: Operates on one Li-ion Battery for up to 8 hours while imaging! • Charger included
Transducers, cables and accessories are
available for almost any application
Plastic carry case included
CE Approved
Manufactured in facilities meeting ISO9001
manufacturing processes
|
|
|
|
|
|
Flaw Detection Features included standard that are typically OPTIONAL in competitive units include:
|
|
